;)
;)
;)
;)
Double Girder Overhead Crane Description1. Motors: are in accordance with ISO 9001:2000 ISO 14001:2004, specially crane motors are suitable for frequent starting, reversing and braking2. Brakes: independent hydraulic brake, safer and easier to con
Tel:+86-373-7181222
Email:manager@zgjrjx.com
- Description
- Parameters
Double Girder Overhead Crane Description
1. Motors: are in accordance with ISO 9001:2000 ISO 14001:2004, specially crane motors are suitable for frequent starting, reversing and braking
2. Brakes: independent hydraulic brake, safer and easier to control
3. Gear box: carbon alloy steel, gear boxes are made of accurate hob cut helical spur gears and pinions, hardness 250 to 350 BHN made from
4. Electrical panel: nodular design, ease to install and maintain, reliable operation, fuse less circuitry, ducted wiring and compact terminals
5. Limit switch: safety limit switches prevent over traveling length, overload protection prevent overloading, etc
6. Wheels: the wheels are produced in special vacuum casting workshop, no sand inclusion technique, more elastic, more hard-wearing and durable
7. Painting: two layers primer before assembly and two layers synthetic enamel after testing
Double Girder Overhead Crane Features
1. Widely used heavy duty, wider spans, higher working frequency.
2. Double girder overhead cranes are available with load capacities up to 100T and with spans up to 50m, suitable for lifting and transporting loads over 20T and span more than 25m.
3. End carriage joints can ensure positive contact of all four wheels with track.
4. The girder profiles are produced weldless with integrated technology, so that can achieve maximum performance with minimum dead weight.
5. Variable speed through VVF drive, Wireless radio remote control and cabin operate, Shrouded DSL system for power feeding, PLC automatic control system.
| Lifting capacity (t) | 5-50/10 | 75-100/20 | 125/32-250/50 | 300/40-350/75 | 400-450/80 | ||||||
| Span (m) | 10.5-31.5 | 13.5-31.5 | 13-31 | 17-22 | 21 20.8 | ||||||
| Crane travel mechanism | Speed (m/min) | A5 | 17.7-91.9 | ||||||||
| A6 | 17.7-93.7 | ||||||||||
| Hoist Lift & travel mechanism | Lifting speed (m/min) | Main hook | A5 | 3.9-11.3 | 0.84-4.4 | ||||||
| A6 | 4.9-15.6 | ||||||||||
| Aux hook | 4.78-15.6 | ||||||||||
| Max. Lifting height (m) | Main hook | 12 16 20 22 24 25 28 30 32 | |||||||||
| Aux hook | 14 16 18 22 26 30 32 33 40 | ||||||||||
| Traveling speed (m/min) | 5-44.6 | ||||||||||
| Working duty | A5 A6 | ||||||||||
| Power supply | 380V 50HZ 3phase or as your required | ||||||||||
Leave Messages
Please Feel free to give your inquiry in the form below.We will reply you in 24 hours.
